4
Invisible 3
0
--0,2
16
+0,4
--0,1
1.5
3.7
+0,2
0
+0,
2
0
4.7
2.7
3.7
16
(12.3)
4.2
+0,2 0
0
- 0,2
+0,4
-0,1
A
B
C
33.3
33.3
33.3
29.5
34
0
-0.5
3100 / lto
66.7
24.4
1.7
231.5
100
0
-0.5
48
40.5
22
33.3
29.7
33.3
117.5
100
18
6.5
25
ø 4.5
150
3100 / lto
1/2019 (EN)
EN
Assembly instructions
The following steps must be carried out when assembling the Invisible 3 profile for 16 mm wooden panel:
1. Screw first profile to the lowest panel from the rear using 3.5 x 15 mm wood screws - see »
A
« for edge contour.
2. Screw pre-mounted panel to substructure from the front. The indicated bore holes must be countersunk in the profile. The profile is screwed to the
substructure using countersunk screws - see »
B
«.
3. All further profiles are to be pre-assembled according to steps 1 and 2, fitted to the lower profile and screwed together. See »
C
« for bottom panel
groove.
Assembled directly onto the wall
Assembled onto substructure
e.g. Fixation profile
Invisible 3 profiles are available in two different versions:
• Single sided (18 mm) assembled on wooden panels
• Double sided (34 mm) assembled between profile frames (min. 35 mm)
Assembly dimensions / Layout - Invisible 3 profile single sided and double sided
Invisible 3 profile double-sided
Invisible 3 profile single sided
