- 1 -
SPECIFICATIONS
Model: VCAP1F
Capacitance--------------------------------------1,000,000 mfd (1 farad)
Working Voltage--------------------------------20 DC
Surge Voltage------------------------------------24 DC
E.S.R.(Equivalent Series Resistance)---------0.0018 ohm @120hz/ 25°C
Capacitance Tolerance--------------------------± 10%
Model: VCAP1FD
Capacitance--------------------------------------1,000,000 mfd (1
farad)
Working Voltage--------------------------------20 DC
Surge Voltage------------------------------------24 DC
E.S.R.(Equivalent Series Resistance)---------0.0018 ohm @120hz/ 25°C
Capacitance Tolerance--------------------------± 10%
Installation and Mounting
For maximum performance your Visonik Stiffening Capacitor should be
mounted as close to your amplifier(s)as possible. A low resistance
connection between the amp and the capacitor is required for maximum
performance. High resistance connections or long wire lengths reduce the
capacitors effectiveness. Be sure to firmly mount the capacitor to a
stationary object in the vehicle. Use caution when selecting a suitable
location. Be aware of any hazards that may cause a short circuit, which will
damage the capacitor.
Note:
You must first attach the mounting tabs to the Stiffening Capacitor
before mounting it. Use the supplied hardware shown in the picture to the
right. Notice the small mounting screw hole in the capacitor chassis.