4
D-304493 TOWER CAM PG2
Installation Instructions
A.
Tamper switch
B.
Press firmly to release the bracket
C.
1 screw
Steps 7 and 8 are optional for external 7.5 VDC power connection
D.
Snap the terminal block into place.
Caution!
Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the manufacturer's instructions.
Caution!
The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 66°C, or
incinerate. Replace battery with CR17450 Lithium batteries manufactured by EVE only. Dispose of used battery promptly. Keep away from
children. Do not disassemble and do not dispose of in fire.
Note:
Tamper protection is mandatory for UL burglary installations.
Figure 4 – Battery Insertion
