2
DE6102
Figure 2.
Interconnection with the Visonic Ltd.
DL-125B Digital Dialer
Figure 3.
Interconnection with the Visonic Ltd.
CP-407DL/T Control Panel
4
44
4. RECORDING AND TESTING
. RECORDING AND TESTING
. RECORDING AND TESTING
. RECORDING AND TESTING
Note:
Make sure that a jumper is mounted across the two
INT
pins of the audio input header. If you intend to record from an
external audio source, remove the
INT
jumper and connect the
external audio source across the
EXT (+)
and (-) pins.
1.
Complete all connections as explained in Section 3 and
power up the system.
2.
Depress and hold down the
REC
button, while speaking at
normal voice level about 50 cm (20 in) from the microphone.
When through, release the pushbutton. Remember that
message duration is limited to 20 seconds.
Note:
It is advisable to make the recording in a quiet
environment. Turn off nearby radio receivers and noisy
machines, and ask people in your immediate vicinity to keep
silent while you record. If the background noise is too high,
speak closer to the microphone.
3.
If you exceed the 20 second limit, the last part of the message
will overwrite its first part, making the message incoherent.
Initiate playback (see 4 below) and verify that this has not
occurred. If the message proves too long, rephrase it to
reduce its duration and record again.
4.
To initiate playback for testing purposes, momentarily short
the two
ST
pins on the PCB together. The message will be
played back once. Repetitive playback will result if the pins
are kept shorted together.
5.
Having checked the recorded message, you may now
disconnect the loudspeaker from the speech processor, to
prevent the message from being heard at the installation site
each time the unit is triggered into playback.
WARRANTY
WARRANTY
WARRANTY
WARRANTY
Visonic Ltd. and/or its subsidiaries and its affiliates ("the Manufacturer") warrants its
products hereinafter referred to as "the Product" or "Products" to be in conformance with
its own plans and specifications and to be free of defects in materials and workmanship
under normal use and service for a period of twelve months from the date of shipment by
the Manufacturer. The Manufacturer's obligations shall be limited within the warranty
period, at its option, to repair or replace the product or any part thereof. The Manufacturer
shall not be responsible for dismantling and/or reinstallation charges. To exercise the
warranty the product must be returned to the Manufacturer freight prepaid and insured.
This warranty does not apply in the following cases:
improper installation, misuse,
failure to follow installation and operating instructions, alteration, abuse, accident or
tampering, and repair by anyone other than the Manufacturer.
This warranty is exclusive and expressly in lieu of all other warranties, obligations or
liabilities, whether written, oral, express or implied, including any warranty of
merchantability or fitness for a particular purpose, or otherwise. In no case shall the
Manufacturer be liable to anyone for any consequential or incidental damages for breach
of this warranty or any other warranties whatsoever, as aforesaid.
This warranty shall not be modified, varied or extended, and the Manufacturer does not
authorize any person to act on its behalf in the modification, variation or extension of this
warranty. This warranty shall apply to the Product only. All products, accessories or
attachments of others used in conjunction with the Product, including batteries, shall be
covered solely by their own warranty, if any. The Manufacturer shall not be liable for any
damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially or
otherwise, caused by the malfunction of the Product due to products, accessories, or
attachments of others, including batteries, used in conjunction with the Products.
The Manufacturer does not represent that its Product may not be compromised and/or
circumvented, or that the Product will prevent any death, personal and/or bodily injury
and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the
Product will in all cases provide adequate warning or protection. User understands that a
properly installed and maintained alarm may only reduce the risk of events such as
burglary, robbery, and fire without warning, but it is not insurance or a guarantee that such
will not occur or that there will be no death, personal damage and/or damage to property
as a result.
The Manufacturer shall have no liability for any death, personal and/or bodily injury
and/or damage to property or other loss whether direct, indirect, incidental,
consequential or otherwise, based on a claim that the Product failed to function.
However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or
damage arising under this limited warranty or otherwise, regardless of cause or origin, the
Manufacturer's maximum liability shall not in any case exceed the purchase price of the
Product, which shall be fixed as liquidated damages and not as a penalty, and shall be the
complete and exclusive remedy against the Manufacturer.
Warning:
The user should follow the installation and operation instructions and among
other things test the Product and the whole system at least once a week. For various
reasons, including, but not limited to, changes in environmental conditions, electric or
electronic disruptions and tampering, the Product may not perform as expected. The user
is advised to take all necessary precautions for his /her safety and the protection of
his/her property.
6/91
VISONIC LTD. (ISRAEL):
P.O.B 22020 TEL-AVIV 61220 ISRAEL. PHONE: (972-3) 645-6789, FAX: (972-3) 645-6788
VISONIC INC. (U.S.A.):
10 NORTHWOOD DRIVE, BLOOMFIELD CT. 06002-1911. PHONE: (860) 243-0833, (800) 223-0020 FAX: (860) 242-8094
VISONIC LTD. (UK):
FRASER ROAD, PRIORY BUSINESS PARK, BEDFORD MK44 3WH. PHONE: (0870) 7300800 FAX: (0870) 7300801
VISONIC LTD. 1998 SP-2 D-6102-0 NEW : DE6102- (REV. 2 , 4/98)
