2
DE3594 CLIP MCW / CLIP T MCW Installation Instructions
PHYSICAL
Dimensions (H x W x D):
105 x 35 x 30 mm (4-1/8 x 1-3/8 x
1-3/16 in.).
Weight (with battery):
60 g (2.1 oz).
Color:
White.
PATENTS
U.S. Patent 5,693,943 (other patents pending)
3. INSTALLATION
3. INSTALLATION
3. INSTALLATION
3. INSTALLATION
3.1 General Guidelines
3.2 Regular Mounting
3 VOLT
LITHIUM
BATTERY
BACK
TAMPER
SWITCH
(OPTIONAL)
SENSOR
LEDS
RF
MODULE
FRONT
TAMPER
SWITCH
RANGE
SELECT
JUMPER
LED
ON/OFF
JUMPER
Figure 7.
Internal View
BACK
TAMPER
SWITCH
A BACK TAMPER ALERT
IS ACTIVATED WHEN THE
B A S E I S D E TA C H E D
FROM THE WALL
Figure 8.
Back Tamper (Rear) View
BREAK-AWAY
SEGMENT
ATTENTION:
The back tamper
switch becomes functional
only when the break-away
segment is secured to the
wall with a screw.
INSERT SCREW TO
SECURE COVER
WITH BASE
4
3
POSITION THE
PCB IN ITS
PLACE IN THE
BASE
1
DRILL TWO HOLES
IN THE MOUNTING
SURFACE AND
SECURE BASE
WITH TWO
SCREWS
2
FOR BACK TAMPER
(OPTIONAL), DRILL
TWO HOLES
AND SECURE
WITH TWO SCREW
Figure 9.
Surface Mounting
Notes:
1)
After mounting, be sure that no gaps remain in the detector
housing. For example, in the area around the screw holes.
2)
Remove the battery using your fingers, and not with a screwdriver.
3.3 Bracket Mounting
Note
: When mounting using the bracket, the back tamper is not
functional
.
DRILL TWO
7 mm (1/4“)
HOLES
AT THE
MARKED
SPOTS
Figure 10.
Drilling Holes
