Fon 0 93 64/81 76 00 - Fax 0 93 64/81 76 029 - [email protected] - www.visomax.de
Safety notes for compressed air eccentric devices
]
When the workpiece or one of the accessories or even the compressed air tool itself breaks,
parts may be ejected at high speed.
]
In operation and at repair and maintenance work as well as when replacing accessories at the
compressed air tool, always wear impact-resistant eye protection. The degree of required
protection should be evaluated separately for every single use.
]
Wear a safety helmet when performing work overhead. This avoids injury.
]
Observe a safe distance from your work area in other persons. Everyone who enters the
work area must wear personal protection equipment. Fragments of the workpiece or broken
cutting discs may fly away and cause injury even outside of the direct working area.
]
Caution! Tools may grow hot when the compressed air tool is operated for an extended time.
Use safety gloves.
]
The operator and maintenance staff must by physically able to handle the size, weight and
output of the compressed air tool
]
Be ready for unexpected movements of the compressed air tool that may occur due to
reaction forces or breaking of the usage tool. Hold on to the compressed air tool well and
put your body and your arms into a position in which you can catch these movements. These
precautions can avoid injury.
]
Take a comfortable position for working with this compressed air tool; observe secure hold
and avoid unsuitable positions or such positions where it is difficult to remain balanced. The
operator should change his body posture during extended work, which may help avoid
discomfort and fatigue.
]
At interruption of the air supply or reduced operating pressure, switch off the compressed air
tool. Check the operating pressure and restart at best operating pressure.
]
Use only the lubricants recommended
]
Never put your hand close to turning tools. You may injure yourself.
8
Visomax Coating GmbH
- Sonnenstrasse 55 - D-97225 Zellingen
