Quick Start Guide
M55-ML3-QSG, Rev B
T:
+1 908 852 3700
T:
+44 1442 431300
E:
W
Vislink is a company of Vislink Technologies, Inc.
3.
OLED Display
The Local User Interface consists of an OLED display and a toggle. It is simple to use.
The display indicates the following features:
•
Channel number
•
Frequency
•
Power
–
High, Low, Standby
•
Bandwidth
To make changes to any of these features from local User Interface, click
at the center of the toggle to choose the feature and then move the toggle
up/down to change the value. Once the required value is chosen, click at the
center of the toggle again to exit.
To choose the next feature, move toggle left/right.
4.
Using the Webpage to control the MLT
•
On your iPhone/Android phone, go to Settings
•
Under the Wi-Fi list, the Microlite 3 would be listed using an SSID. SSID will contain
“ML”
followed by the last 5 numbers of the Microlite 3 serial number
–
i.e., ML01234.
Note: The serial number is found on the unit label.
•
Now connect the phone/tablet/computer to the Microlite 3 Wi-Fi.
•
Enter password
–
‘imtgonow!’
•
Open browser (Mozilla Firefox, Safari, and Google Chrome) and enter the
URL
‘192.168.1.1’
to get to the Microlite 3 Webpage GUI.
•
Menu dropdown in GUI:
•
Home
–
Turn ML3Tx on and off
–
also tells frequency status
•
Settings
–
Changes transmitter frequency, Modulation, code rate, and
guard interval. It also has some advanced setting options
•
Frequency Plan
–
Used to change the frequency plan.
Settings
