Vislink InCam-HG, Руководство пользователя

Страница: 39 / 43

Template Operators Manual
InCam Setup
Issue No: 1
Page: 39
Ref: INHG-ASUM-70XX
Copyright © 2020 IMT and Vislink are Vislink Technologies Inc. companies
Decoder audio output:
o
Channel 1 – Analogue Camera Head
o
Channel 2 – Analogue Camera Head (duplicated)
o
Channel 3 – SuperSlot AES 1
o
Channel 4 – SuperSlot AES 2
7.4.2. External Audio 2
The Rear External Audio 2 requires configuring as Audio Pair 1. The
Camera Analogue audio requires configuring as Pair 2,
o
Audio 1, Pair 1,
▪
Analogue (Ext Audio 2)
o
Audio 1, Pair 2,
▪
Embedded – Group 1, Pair 1 (Camera analogue Audio)
Decoder audio output:
o
Channel 1 – Analogue Ext Audio 2
o
Channel 2 – No Audio
o
Channel 3 – Analogue Camera Head
o
Channel 4 – Analogue Camera Head (duplicated)
NOTE: Decoder outputs based on the Decoder Service mode set to
Program Number.
7.5. InCam Back Indications
The InCam-HG has camera control Green LED indications:
•
TX LED – Only flashes when in Generic (Transparent) mode or Return Data
mode is on to indicate data from the camera to the MVL transmitter.
•
RX LED – Flashes to indicate valid Camera Control data received. Only
flashes when UHF frequency and Camera address (ID) is correct.
Figure 7-2 Camera Control Indication LED’s