Note: Use only active Thunderbolt™ 3 cables for runs
longer than 0.5m.
5) Connect the AC power cable to the
enclosure and to a power outlet. Turn on the
power supply.
6) Connect the Thunderbolt™ 3 cable to the
enclosure and connect the other end to your
computer.
3) Install the graphics card driver for your installed
graphics card. Please refer to your graphics card
manufacturer’s website for driver download
and installation instructions.
Thunderbolt™ 3
Port
AC Power
Port
1) After connecting the eGFX enclosure, the
Thunderbolt™ device will be detected by the
computer. Click to approve the device.
System Configuration:
2) When the system shows the dialogue box
below, select “Always Connect” for each
controller.
Click “OK” to complete setup.
Graphics Card
Display Out
7) Connect your display to the display out ports
on your graphics card.
Note: Display out ports may vary depending on installed
graphics card.
5 | Quick Start Guide
7 | Quick Start Guide
6 | Quick Start Guide
4 | Quick Start Guide
For additional product support contact:
VisionTek Support
Toll-free call:
1 (866) 883 5411
Hours: 8 am to 5 pm CST
Email:
