4
TO MAKE A VOICE CALL:
Connect head-set provided on rare panel of modem and follow procedure. Make sure all
hyper terminal settings are OK. Then connect the modem to PC RS-232 Port and type the
command.
AT+SPEAKER=1 (or) AT+CHFA=1 for voice. Then dial the Number ending with semi colon.
For Ex: ATD9849798986; To disconnect the call, Type ATH command.
NOTE:
For voice call dialed number should end with Semi colon where as for data call it is
not required.
1. In the Connection Description Dialog Box, type a name and
Click OK.
2. Select which Comport are Configured in the Modem Select
and Click OK.
3. Select the Port setting with Baud Rate (9600) and click OK.
4. In the hyper-terminal Connection window Type AT and
Press Enter OK response you get ready to Use Modem.
HYPER TERMINAL SETTINGS:
