VisionQuest LVQ2001, Руководство пользователя

Страница: 20 / 29

OPERATION INSTRUCTIONS PART II(VIDEO)
TUNING PROCEDURE(NOTE)
STEP 2:
AUTO MEMORY
STEP 1:
Turn on the TV
-18-
1
1. Press the MENU button on your TV (or remote controller) three times to enter TUNING menu.
If it is in VIDEO/S-VEDIO/YCbCr /PC mode, it can't enter TUNING menu.
2. Press Buttons to select "AUTO MEM." then press button to automatically search
and store all the signals in your area. broadcasting TV When presetting complete, the initial
position number will reappear.
NOTE:
You 'd better select the correct frequency system, color and sound system for the first channe
before searching. Detailed discreption is said below.
There are 4 frequency system can be used, such as STD,HRC,IRC,AIR.
In AIR mode, the set receives antenna signals;
In STD/HRC/IRC mode the set receives Cable TV programs.Please select:
AIR: If using VHF/UHF antenna.
STD,HRC,IRC:If using Cable TV.
TO SKIP A PROGRAM
You may skip any program number by following the steps below:
1.Select the program number to be skipped by pressing CH+/CH- button or number button .
2.According to mentioned steps above, enter TUNING menu.
3.Press buttons to select "ADD/ERASE", then select "ERASE" by buttons.
4.When the skip is off, it indicates that this channel is not skipped.
NOTE:
If the channel is skipped,you can't obtain it by CH+/CH-. But you can get it by using
NUMBER KEY(0-9).