visionLINE TAURUS - AU, Инструкция по установке и эксплуатации

Страница: 21 / 21

20
• Non VisionLINE venting components, hearth components or other accessories used in conjunction with the
appliance.
• Any part of a pre-existing fireplace system in which an insert appliance is installed.
• Removal, installation, reinstallation, set up or any other costs associated with a claim including travel and
shipping charges for parts.
• VisionLINE’s obligation under this warranty does not extend to the appliance’s capability to heat the desired
space. Information is provided to assist the consumer and the dealer in selecting the proper appliance for the
application. Consideration must be given to appliance location and configuration, environmental conditions,
insulation and air tightness of the structure.
This warranty is void if:
• The appliance has been over-fired or operated in atmospheres contaminated by chlorine, fluorine, or other
damaging chemicals. Over-firing can be identified by, but not limited to, warped plates or tubes, rust coloured cast
iron, bubbling, cracking and discoloration of steel finishes.
• The appliance is subjected to prolonged periods of dampness or condensation.
• There is any damage to the appliance or other components due to water or weather damage which is the result
of, but not limited to, improper chimney or venting installation.
HOW TO CLAIM
• To make a claim against this warranty, contact your local distributor during regular business hours. See
addresses below for a dealer nearest you. (Vic) Pty Ltd ACN 005 872 159 (
Jetmaster VIC ) .
• Additional service fees may apply if you are seeking warranty service from a dealer other than the dealer from
whom you originally purchased the product.
• Check with Jetmaster VIC in advance for any costs to you when arranging a warranty call. Travel and shipping
charges for parts are not covered by this manufacturers’ warranty.
• VisionLINE and Jetmaster VIC will assess your claim. VisionLINE or Jetmaster VIC may need to inspect the
product as part of the assessment of your claim. If the product requires inspection, VisionLINE or Jetmaster will
discuss with you the best way for this to occur.
• To make a claim under this manufacturer’s warranty, you must be able to prove when you purchased the
product. The easiest way to do this is through your original proof of purchase, for example your invoice or receipt.
However, if you do not have your original proof
of purchase VisionLINE or Jetmaster may accept other evidence of the date of purchase.
WARRANTY EXCLUSIONS cont.
• Damages resulting from: (1) failure toinstall, operate, or maintain the appliace in accordance with the installation
instructions, operating instructions, and listing agent identification label furnished with the appliance;
(2) failure to install the appliance in accordance with local building codes; (3) shipping or improper handling;
(4) improper operation, abuse, misuse, continued operation with damaged, corroded or failed components,
accident, or improperly/incorrectly performed repairs; (5) environmental conditions, inadequate ventilation,
negative pressure, or drafting caused by tightly sealed constructions, insufficient make-up air supply, or
handling devices such as exhaust fans or forced air furnaces or other such causes; (6) use of fuels other than
those specified in the operating instructions; (7) installation or use of components not supplied with the
appliance or any other components not expressly authorized and approved by VisionLINE (8) modification of
the appliance not expressly authorized and approved by VisionLINE in writing; and/or (9) interruptions or
fluctuations of electrical power supply to the appliance.
PO Box 5051 Burnley, 3121
Phone: (03) 9429 5573
Email: info@visionlinefire.com.au
Web: visionlinefire.com.au