Visionite VTC-Z7823H, Руководство пользователя

Страница: 22 / 45

22
______________________________________________________
Position Preset
The current zoom / focus position can be stored in the
internal memory and moved to that position if necessary.
A total of 256 locations can be stored.
KT_ZoomFocus
Preset Set 8x 01 70 3F 01 0p
0q 0r FF
pqr : preset Number
(0x000~0x0FF)
Recall 8x 01 70 3F 02 0p
0q 0r FF
Clear 8x 01 70 3F 03 0p
0q 0r FF
Clear All Preset 8x 01 70 3F 0F 00
00 00 FF
Clear all preset data
KT_ZoomFocus
PresetInq 8x 09 703F 0n 0n
0n FF
y0 50 0v 0z 0z
0z 0z 0f 0f 0f 0f
FF
nnn:preset number
(0x000~0x0FF)
v : 1(saved), 0(empty)
zzzz : zoom position
ffff : focus position
Day & Night Setting
● AUTO Mode
If the current illumination is darker than the ICR ON level,
the IR cut filter is removed. If it is brighter than the ICR OFF
level, the IR cut filter is enabled.
ICR ON level = Day To Night level
ICR OFF level = Night To Day level
● DAY Mode (=ICR OFF fixed)
It always maintains the DAY (color) state regardless of the
current illumination.
● NIGHT Mode (=ICR ON fixed)
It always maintains the NIGHT (B/W) state regardless of the
current illumination.
● EXT-L/H Mode
DAY / NIGHT is determined according to the external input
signal.
In EXT-H mode, when the input signal level is greater than
DAY TO NIGHT LEVEL, it switches to NIGHT.
In EXT-L mode, if the input signal level is lower than DAY
TO NIGHT LEVEL, it switches to NIGHT.
KT_DayNightMod
e Auto 8x 01 70 04 00 FF
Day 8x 01 70 04 01 FF
Night 8x 01 70 04 02 FF
Ext-High 8x 01 70 04 03 FF
Ext-Low 8x 01 70 04 04 FF
KT_ExtICRthresho
ld
Day->Night(EXT-H) 8x 01 70 05 10 0p 0q FF
Night->Day(EXT-H) 8x 01 70 05 11 0p 0q FF
Day->Night(EXT-L) 8x 01 70 05 20 0p 0q FF
Night->Day(EXT-L) 8x 01 70 05 21 0p 0q FF
Motion Detect Function
Motion Detect functions instructs the camera to detect
movement within monitoring area and then send an alarm
signal automatically.
◇
Frame
You can set up to 4-frames
Each frame can be set up :
Using VISCA : 16 (horizontally)×8 (vertically) blocks
Using MENU : 60 (horizontally)×34 (vertically) blocks
◇
Sending Alarms
• When motion is detected, the Alarm Replay
command is issued via the serial command (VISCA)
communication line.
• When multiple motions are detected or motion is
detected in another frame within the set interval
following the original time the alarm was issued,
another alarm command is not issued.
• When motion is detected after the interval time
elapsed, the alarm is issued again.
On 8x 01 04 1B 02 FF Motion Detection On/Off
Off 8x 01 04 1B 03 FF
Function
Set
8x 01 04 1C 0m 0n
0p 0q 0r 0s FF
m: Display mode (when motion is
detected)
bit0 : frame display
bit1 : block display
bit2 : Text display
n: Detection Frame Set (0 to F)
bit0(frame1)~bit3(frame4)
pq: Threshold Level (00 to FF)
rs: Interval Time set (00 to FF)
Window
Set
8x 01 04 1D 0m 0p
0q rr 0s FF
m: Select Detection Frame (0, 1, 2, 3)
p: Start Horizontal Position (00 to 0F)
q: Start Vertical Position (00 to 07)
r: Stop Horizontal Position (01 to 10)
s: Stop Vertical Position (01 to 08)
Alarm
(Reply)
y0 07 04 1B 0p FF p: Detection Frame Number
(*) Blocks are output only within the Frame area.
MOTION!!!
Frame
Block
Text