Set Relay Configuration
The relay configuration sets the behavior of the output relay on activation.
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. Pulse Mode
OR
2. Toggle Mode
4 (1-99) #
(factory default)
The relay time is 1-99 seconds. (1 is 500mS.) (Default
is 5 seconds)
4 0 #
Set the relay to ON/OFF Toggle mode
3. Exit
*
Set Doorbell
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. Doorbell OFF
OR
2. Internal Doorbell ON
OR
2. External Doorbell ON
OR
2. Internal & External Doorbell ON
5 0 #
5 1 #
5 2 #
5 3 # (factory default)
3. Exit
*
Remarks:
Press the doorbell on keypad, there will be 2 times ‘dingdong’ from mini controller.
Set Safety Mode
In safety mode, it can be set to deny access for 10 minutes after 10 failed PIN/card attempts in 10 minutes
(Factory default is OFF).
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. Strike-Out OFF
OR
2. Strike-Out ON
6 0 # 0 #
(factory default)
6 0 # 1 #
3. Exit
*
Set Anti-tamper Alarm
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. Anti-tamper Alarm OFF
OR
2. Anti-tamper Alarm ON
6 1 # 0 #
6 1 # 1 #
(factory default)
3. Exit
*
