Visionis VIS-3013, Руководство пользователя

Страница: 27 / 156

Fingerprint Access Control Terminal User Manual
13
Chapter 6 Activation
You should activate the device before the first login. After powering on the device, the system will
switch to Device Activation page.
Activation via the device, SADP tool and the client software are supported.
The default values of the device are as follows:
●
The default IP address: 192.0.0.64
● The default port No.: 8000
● The default user name: admin
6.1 Activate via Device
If the device is not activated before first login, the system will enter the Device Activation interface
after powering on.
Steps
1. Create a device password for activation.
2. Confirm the password.
Note
Press the up or down key on the keypad to change the input method.
3. Press OK to activate the device.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
What to do next
After the device activation, you will enter the administrator adding page. Add an administrator
before other operations.
6.2 Activate via SADP
SADP is a tool to detect, activate and modify the IP address of the device over the LAN.
Before You Start
● Get the SADP software from the supplied disk or the official website, and install the SADP