Visionis VIS-3002, Руководство пользователя

Страница: 9 / 16

8
8.18.1 Normal mode (factory default)
8.18 Setting safe mode
Press 35 0 #
Every time a valid card/tag read or PIN input, the relay will operate, for the pre-set relay
pulse time. (Factory default setting)
Every time a valid card/tag read or PIN input, the relay changes state, which will not turn
back until read card/tag or input PIN again
Note: It is only for card entry mode (Factory default setting : 1, card quantity “1-10”)
Note: The card number must be consecutive card quantity is between 1~2000; card number
is 10 digits or 8 digits
8.12 Set opening door by multi cards
8.13 Add a series consecutive cards users
Press 15 1 #
Relay setting-Toggle mode
Press 16 card quantity #
Press 17 ID number # card number # card quantity #
8.14 system setting
8.14.1 To set facility code
Note: Code should be 0~15, factory default setting: 0
8.14.2 Wiegand Reader Mode (Wiegand 26)
8.14.3 Standalone Mode (Factory default setting)
8.14.4 Anti-passback Mode
Press 31 0 #
Press 31 1 #
Press 31 5 #
Press 30 0~15 #
8.15 To set wiegand format
Press 32 26 #
Note: factory default setting: WG26
8.16 Setting keypad transmission format
8.17 Setting alarm time
Note: Keypad transmission format is 0 1 2, factory default is 0
Press 33 0~2 # (Unable to initialize)
Note: 1. factory default is 1 minute
Press 34 1~3 # (Unable to initialize)