Page
12
/
16
6-4. Video Monitor
Connect Video cable with BNC-male connector to the monitor
6-5. 12V DC Power
This IP camera uses 12VDC or IEEE802.3af PoE for power source. Please make sure to use a UL/CE approved
and 12VDC/500mA regulated power supply or standard PoE injector, mid- or end-span for input power.
PoE (Power over Ethernet) Support
Power over Ethernet, or PoE, technology describes a system to transmit electrical power, along with data, to
remote devices over standard twisted-pair cable in an Ethernet network. This technology is useful for
powering IP telephones, wireless LAN access points, network cameras, remote network switches, embedded
computers, and other appliances where it would be inconvenient and expensive. (Main wiring must be done
by qualified and/or licensed person.)
The standard IEEE 802.3af describes two types of devices: Power Sourcing Equipment (PSE)and Powered
Devices (PD). Power sourcing equipment provides power to the powered devices. The network camera
represents the powered device, whereas a PoE Injector is a PSE device. The VISION Network Camera models
are IEEE 802.3af standard PoE compliant. They can be used with any IEEE 802.3af-compliant PoE injector, PoE
switch, PoE mid-span and PoE end-span.
Various types of PoE equipments
Power over Ethernet (PoE) Injector
PoE Mid-span
PoE Office Switch
