Visionhitech VC58EP-12, Инструкция по эксплуатации

Страница: 11 / 21

11
(4) N TO D LUX (Default : 6LUX))
- Night to Day switching lux level is adjustable.
(5) D/N DELAY TIME (Default : 5Sec)
- Day/Night switching duration time is adjustable in 1 ~ 60 sec.
(6) D/N RESET
- All settings of DAY/NIGHT menu turns to initial factory default value.
(7) RETURN
- It returns to the MAIN MENU.
7-4. AWB (Auto White Balance)
This is useful when the cameras are installed in different artificial
lighting conditions where a standard ‘White Balance’ condition is
not suitable for all.
(1) AWB MODE : ATW / PUSH / HOLD / USER (Default : ATW)
1. Please position the cursor on ‘AWB’ on the
SETUP menu by using the UP and DOWN selections.
2. Please select the mode you wish to operate by using the
LEFT or RIGHT selection.
3. Please select one of the 4 modes below.
(2) ATW MODE : (Auto Tracking White Balance)
- IN : This mode can be used within the color temperature range of 2,500 ˚ K~7000 ˚ K.
- OUT : This mode can be used within the color temperature range of 1,800 ˚ K~10,500 ˚ K.
(Default : IN)
☞
NOTE : In case of indoor use, ATW(IN) mode is higly recommended.
(3) PUSH MODE
:
This mode can be used within the color temperature range of
1,800 ˚ K~10,500 ˚ K.
☞
NOTE : In case of outdoor use, PUSH mode is recommended.
(4) HOLD MODE : This mode is used to fix AWB in a specific environment.
☞
NOTE : When there are drastic movements of some specific colored features such as red,
blue, green or yellow cars on the express road and when environment is volatile so much,
HOLD MODE is strongly rcecommended.
(5) USER MODE
USER MODE is suitable for enhanced users who want to set red and/or blue value
manually according to user’s environment.
Please change to manual adjustment mode and press OSD Switch.
Set the appropriate color temperature, and then increase or decrease the red and blue
color values while monitoring the color changes on the screen.