Visioneer MOBILITY -, Руководство пользователя

Страница: 21 / 25

V
ISIONEER
M
OBILITY
S
CANNER
U
SER
’
S
G
UIDE
21
Maintenance
This section contains scanner information about regular maintenance, specifications and spare parts.
C
ALIBRATING
Y
OUR
S
CANNER
The scanner needs to be calibrated as part of your monthly maintenance of the scanner. If your scanned
images have black or colored vertical lines this may be a sign that you need to perform a calibration. If
calibrating the scanner does not resolve the problem, please go to the next section and follow the steps for
cleaning the scanner.
You will need to have the calibration page ready.
Important! The top of the page is covered with a blue protective film to prevent damage during shipping.
You need to remove the calibration page from the plastic bag and then peel off and discard the blue film.
The calibration page is now ready to use.
1.
Press and hold down the function button on the scanner for at least 2 seconds.
This starts the hardware calibration routine.
2. Insert the Calibration page in the scanner, in the direction of the arrow(s) on the page.
3. When calibration is complete the scanner will eject the page out of the scanner. Do not forcefully pull
the page out, the scanner will release the page when the calibration process is completed.
Place the calibration page back in the clear plastic bag and keep it in a safe place. The calibration page
needs to be kept clean and in good condition. Calibrating the scanner with a dirty or creased calibration
page may cause the image quality to worsen.