© 2021
Step 4 of 4
Order #XXXXX
Locked layer contains
placeholder marks.
Cabinet
Backwall
Threaded
Hole
Insert screw cap through hole of cabinet backwall
into threaded hole of horizontal extrusion [4].
Twist and tighten screw cap to secure in place.
Cabinet to Horizontal Attachment
Screw Cap
Extrusion 4
*
Cam Lock w/ Pill Slot Attachment
*
Tighten screw to clamp cam lock
into groove of vertical extrusion.
Completed Assembly
Large Counter
Monitor
Mount
Workstation Cabinet
*
*
*
* *
4
4A
5
SEG Graphic
Note: Monitor mount installs over SEG graphic.
Monitor Mount
Bolts
Monitor Mount Attachment
*
Attach Monitor Mount to horizontal extrusion
using bolts & wing nuts.
Wing
nuts
Z140
Steps:
1) Attach cabinet to horizontal [4] using threaded stand-off caps.
See
Cabinet to Horizontal Attachment
detail.
2) Install Stand-Off Barrels to top of cabinet.
3) Attach lower shelf to pill slots located on horizontal [4].
See
Custom Cam Lock w/ Pill Slot Attachment
detail.
4) Set large Counter on top of stand-off barrels and
attach to pill slots in horizontal [4A].
See
Custom Cam Lock w/ Pill Slot Attachment
detail.
Small Counter
*
*
Workstation & Shelf Attachments
