Page 9
Folding Readit Scholar for transport
To fold Scholar HD for transport, practically the exact opposite method is
required, plus to buttons must be pressed to release two locking pins on the left
hand side of the stand.
W
ARNING
:
Always ensure the camera lens has fully retracted before transporting. This
is done by exiting the Readit software, pressing the on / off button or
unplugging it. Failure to do so may lead to camera damage and is not
covered by warranty.
1).
Firstly ensure the camera is facing
downwards, (in the standard picture
taking position) and with your left
hand, push and hold the top release
button inwards. It’s on the left hand
side of the crossbar, facing away from
you). With the release button fully
depressed, gently lower the top part of
the stand downwards 180 degrees with
your other hand until it stops.
2).
Next, grasp the crossbar with
your right hand and then press
in the bottom release button,
(located on the left hand side of
the base of the stand). With it
depressed, gently lower the
stand downwards until it is
resting flat on the base. Finally,
Ensure the camera head is also
pushed flat to the base.
Push button
down
Push button down