Problems
Troubleshooting
Nothing appears on the
screen.
· Please check that the power cord and line connection
between the camera and monitor are fixed properly.
· Please check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen
is dim.
· Is lens stained with dirt? Clean your lens with soft,
clean cloth.
· Set the monitor to proper condition.
· If the camera is exposed to too strong light, change
the camera position.
The image on the screen
is dark.
· Adjust the contrast feature of the monitor.
· If you have an intermediate device,
set the 75Ω / Hi-Z properly
(Please check the impedance)
The camera is not working
properly, and the surface
of the camera is hot.
· Please check that you have properly connected the
camera to an appropriate power source.
The screen flickers
continually.
· Please check that direction of camera turns toward
the Sun.
MODEL
Model
Compact Night Vision Camera
Standard
Cable-through type bracket
Image Device
1/3" HIGH RESOLUTION SUPER SENSITIVE CCD
Effective Pixels
NTSC : 976(H)X494(V), PAL : 976(H)X582(V)
Scanning System
NTSC 525 Lines PAL 625 Lines 2:1 Interlaced
Synchronization
Internal
H.Resolution
700TV Lines (Color) / 750TV Lines (B/W)
Min. illumination
0lux (3lux at IR ON)
Video OUT
1.0 Vp-p / 75 ohm
S/N Ratio
More than 50db
Gain Control
AUTO
LENS
3.6mm, 4.3mm, 6mm board Lens
Shutter speed
AUTO
White Balance
ATW (2,500°K ~ 10,000°K)
Day&Night
AUTO (COLOR, B/W)
DPC
Power Source
Dead Pixel Compensation
12VDC
Power Consumption
Board Type : 90mA(IR OFF) /285mA(IR ON)
Viewable Distance
UP to 20M at Moonless Night
MTBF
20,000 hours
Operating Temp.
-10°C ~ 50°C
Storage Temp.
-20°C ~ 60°C
Measurement (mm)
69.7 x 123.6 x 77.4
69.7 x 178.5 x 79.4
Weight (Approx.g)
265g
400g
11
1.2
77.4
79.
4
47.
6
50
67.
5
5. Installation
6. Troubleshooting
7. Dimension (mm)
(Option: Cable-through type bracket)
◆ Wall
If there are problems in operating, please refer to the checklist below.
If the problem persists, please contact the agent where this product is purchased.
(Option: Cable-through type bracket)
69.7
67.7
50
(C)
(B)
(A)
◆ Celling
178.5
144.6
(A)
(C)
(B)
①
Drill three screw holes on the wall / ceiling plate to fix three anchor (supplyed)
in the holes.
②
Fix the plastic anchors in the holes.
③
Position the mounting bracket on the screw points.
®
Fix the mounting bracket by tightening the screws.
®
Slightly loosen bolt (A), (B) then adjust TILT (180°) and PAN (360°) of the camera
using a serration on the bracket and tighten the bolts firmly.
@
Slightly loosen bolt (C) then adjust ROTATE (360°) of the camera and tighten the
bolt firmly.
7. Dimension (mm)
(Standard)
69.7
123.6
99
8. Specification
5-2. 3-Axis Adjustment
(Standard)
(Option: Cable-through type bracket)
TILT 90°
ROTATE 360°
PAN 360°
Pan bolt
65
TILT 180°
ROTATE 360°
PAN 360°
Tilt bolt
Rotation bolt
120°
* Specifications are subject to change without prior notice for improvement.
130612-1
