Vision VD-80PN, Быстрое руководство по установке

Страница: 11 / 12

Mod D e E l L
Hi-Res Indoor Dome Camera
Image Device
1/3" HIGH RESOLUTION SUPER SENSITIVE CCD
Effective Pixels NTSC : 976(H)X494(V), PAL : 976(H)X582(V)
Scanning System
NTSC 525 Lines PAL 625 Lines 2:1 Interlaced
Synchronization Internal
H.Resolution
700TV Lines(Color)/ 750TV Lines(B/W)
Min. illumination
0.1 lux / IR version (0 lux, 3 lux/IR ON)
Video OUT
1.0 Vp-p / 75 ohm
S/N Ratio
More than 50db
Gain Control
AUTO
LENS
3.6mm, 4.3mm, 6mm board Lens
2.8~12mm VF Auto DC iris Lens
Shutter speed
AUTO
White Balance ATW (2,500°K ~ 10,000°K)
Day&Night
AUTO (COLOR, B/W)
DPC Dead Pixel Compensation
Power Source 12VDC
Power Consumption
Board Type : 80mA
Board IR Type : 90mA(IR OFF) / 285mA(IR ON)
VF Type : 100mA
VF IR Type : 140mA(IR OFF) / 330mA(IR ON)
Viewable Distance
UP to 20M at Moonless Night
MTBF 20,000 hours
Operating Temp.
-10°C ~ 50°C
Storage Temp.
-20°C ~ 60°C
Measurement (mm) 114(Φ) x 90(H)
Weight (Approx.g)
Board Type : 160g / Board IR Type : 180g
VF Type : 185g / VF IR Type : 205g
Problems Troubleshooting
Nothing appears on the
screen.
· Please check that the power cord and line connection
between the camera and monitor are fixed properly.
· Please check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen
is dim.
· Is lens stained with dirt? Clean your lens with soft,
clean cloth.
· Set the monitor to proper condition.
· If the camera is exposed to too strong light, change
the camera position.
The image on the screen
is dark.
· Adjust the contrast feature of the monitor.
· If you have an intermediate device,
set the 75Ω / Hi-Z properly
(Please check the impedance)
The camera is not working
properly, and the surface
of the camera is hot.
· Please check that you have properly connected the
camera to an appropriate power source.
The screen flickers
continually. · Please check that direction of camera turns toward
the Sun.
Driling template
Plastic anchor (3EA)
Camera set
Tapping Screw (3EA)
48.2
90
120°
5. Installation 6. Troubleshooting 8. Specification
*
OPTION: Varifocal Lens (2.8~12mm)
- Varifocal Lens adjustment
If there are problems in operating, please refer to the checklist below.
If the problem persists, please contact the agent where this product is purchased.
Focus Knob
Zoom Knob
LED COVER
- Zoom (Tele-Wide)
Unlock the zoom lever by turning
counterclockwise.
Move the lever to adjust the zoom.
Lock the lever by turning clockwise.
- Focus (Near-Far)
Unlock the focus lever by turning
counterclockwise.
Move the lever to adjust the focus.
Lock the lever by turning clockwise.
< NOTE : >
With difficulty of lens adjustment of VF IR Type.
You could uncover the LED cover.
Push the hook on both sides to separate the LED COVER and adjust
the lens.
PUSH
PUSH
5-3. How to mount to Celling
7. Dimension (mm)
* Specifications are subject to change without prior notice for improvement.
MEMO
DC JACK
Female
BNC or RCA
Female
Ø81.4
Ø113.8
Dome Cover Ass'y
①
Fix the supplied drilling template on the wall.
②
Drill holes and Insert plastic anchors into the hole
(in case of masonry ceiling or wall).
③
Fix the camera set using supplied tapping screws.
④
Push lock the dome cover ass’y after checking camera direction.
130523-1