The green ‘Ready’ light indicates that all detectors are secure and ready to arm.
If the ‘Ready’ light is not on, one or more detectors are activating (open) and are
not ready to be armed. Depending on your system’s design, this may or may not
prevent your system from arming. Vision’s Zone Indicator lights display which
zone(s) have detectors which are in alarm (or open). Check the detector(s) on
the zone(s) and arm your system. If you are unable to reset the detectors and
return to ‘Ready’ mode, call your security company for assistance.
System Operation
- Arm without entry delay: press + during Exit Delay period.
- Arm without exit delay: press + during Exit Delay period.
- Your entire security system can be turned on by pressing the button for
approximately two seconds.
- A PIN number can be required before pressing to turn on the system. Ask
your security company if you would like this feature activated.
Additional Arming Options
After pressing to begin arming, keypads will beep slowly during the exit delay
period (if applicable). The tempo increases for the last ten seconds of the exit
delay period and a sustained tone indicates that the delay period has expired
and arming is now complete. After the arming process has been initiated, a valid
user PIN must be entered to cancel arming.
9
Utility
4
Quick
0
