7
Wall Mounting (if using option-B)
Note:
- Installation must be carried out by qualified
personnel only. Incorrect assembly can
result in severe personal injury and property
damage (if you intend to install this product
yourself, you must check for installations
such as electrical wiring and plumbing
that may be buried inside the wall). It is the
installer’s responsibility to verify that the
wall will safely support the total load of the
unit and wall brackets.
- Additional tools (not included) are required
for the installation.
- Do not overtighten screws.
- Keep this instruction manual for future
reference.
- Use an electronic stud finder to check the
wall type before drilling and mounting.
1. Drill 4 parallel holes (Ø 3-8 mm each
according to wall type) in the wall. The
distance between the holes should be 710
mm.
- Firmly fi x 1 dowel into each hole in the wall
if necessary.
2. Tighten the wall mount brackets on the wall
with screws and screwdriver (not included).
Make sure the they are securely installed.
3. Loosen the screws at the back of the unit
for 3 mm. Lift the unit onto the wall mount
brackets and slot into place.
710mm
710mm
3mm
Connect to Power
- Before connecting the AC power cord,
ensure you have completed all other
connections.
- Risk of product damage! Ensure that the
power supply voltage corresponds to
the voltage printed on the back or the
underside of the unit.
• Connect the mains cable to the
AC~
Socket
of the unit and then into a mains socket.