Wall Panel
Corner Post
Fascia Gable
Vent (Inside & Outside)
Ridge Cap
Ridge Beam
Gable End Cap
Roof Fascia Cap
Lintel
(Upside Down)
Roof Panel
Base Track
Slope Wall Cap
Door Handle (2)
Door Latch (2)
Door (2)
#8 x 1" Pan Head Screws (150)
Hinge Screws (12)
#8 x 3/4" Pan Head Screws (65)
Parts Identification
Tools Required
• Power drill with Phillips
®
(#2) or a #2 square bit • Carpenter’s square
• Level • Rubber mallet • Hammer • Safety glasses • Gloves • 1/4" and 5/32" drill bit
• Wrench - 7/16" size • Measuring tape - minimum 16' feet (5m) • Ladder
Phillips is a registered trademark of PhillipsScrew Co.
Materials Needed
• Silicone caulking
4