PRECAUTIONS
NOTE : Not following these instructions or ignoring these precautions may
cause a flood or malfunction and may damage the device used in this
housing.
-
When storing and transporting the housing, protect it with a soft
pouch or something that won’t scratch or damage the housing.
-
When used, the o-ring must be absolutely clean and free of sand,
hairs or any other particule.
-
Sealing surface must also be cleaned before being used.
-
Rinse the housing in fresh water after each use. Clean the buttons
area and then wipe the whole system before removing the cap.
-
Replacing the o-rings should be done once a year to assure best
sealing and waterproofness.
-
Avoid scratching the main window and the camera lenses acrylic
parts.
-
To remove an o-ring, use a non-sharp plastic tool that won’t break it.
-
Only use replacement parts provided by OVISION or by one of its
authorized dealer.