Menu #21 - IP
Adjustable list, displays the IP address of SNMP
Menu #22 - Sub
Adjustable list, displays the address of net mask
Menu #23 - GW
Adjustable list, displays the gateway address of SNMP
Menu #24 - TR1
Adjustable list, displays the TRAP1 address of SNMP
Menu #25 - TR2
Adjustable list, displays the TRAP2 address of SNMP
3.1.3 Menu assistant manual
1. Press up/down key to amend the IP address menu that should be
amended, press „ to choose the amend place, push
▲
\
▼
currently value
+\-1, press
to enter into save and
exit.
For example, amend IP setup menu, IP: 192.168.000.015; if change 5 to 6,
use
key to choose the place of 5, then press
▲
key to change 5 to
6, then press
to save amended IP:192.168.000.016
2. The manual for the control way of RF modulation
The default control way is AGC. That is, when you use
▼
or
▲
to switch
the menu to the modulation control way, it shows: RF Mode = AGC.
At this time, when you press
, it shows: RF Mode = ; when you
press
▼
or
▲
, it shows: RF Mode = MGC, press
to save, then the
switch from the AGC to MGC is done.
If you want to re-switch the modulation control way to the AGC, just press
when the menu shows RF Mode = MGC, it will show RF Mode = ,
then click
▼
or
▲
, Press the
to save, it shows: RF Mode = AGC.
Page 6 of 7