10
CS-1800P_manual_en
STATUS INDICATORS
On the front panel is a row of status LEDs:
BLUE LED
– Bluetooth input
Flashing slowly: Bluetooth is in pairing mode
On: Device paired
If devices unpaired it will turn off after 10 minutes.
YELLOW – line-level input
On: cable input selected
RED LED
– Amplifier in standby
Flashing slowly: mute activated
Flashing quickly: IR from remote control being received
On: loudspeakers off
CHANGING BLUETOOTH NAME
CS-1800P uses Bluetooth 4.0 LE. Where you have multiple sets in close proximity you may want
to rename them.
1.
SELECT BLUETOOTH INPUT on the CS-1800P remote control to put in pairing mode.
2.
PAIR ANDROID DEVICE TO SPEAKERS Settings > Bluetooth on your phone or tablet.
3.
GO INTO SETTINGS ON ANDRIOD DEVICE there is an option to rename here.
At time of writing iOS devices do not support changing name.