Vision Tech Shop TVD Series, Техническое руководство

Страница: 6 / 29

TVD Series Multifunction Scale Scale Technical Manual
- 3 -
3. INSTALLATION
3.1 Unpacking
When you receive the scale, inspect it to make sure that it is not damaged and
that all are parts are included:

Remove the scale from the carton.

Remove the protective covering. Store the packaging and to use if you
need to transport the scale later.

Inspect the scale for damage.

Make sure all components are included.
1. Scale
2. Adaptor
3. Manual
4.Stainless steel pan
3.2 Installation

Remove transport lock from bottom of the scale base

Place the scale on a level surface

Place the ABS plastic pan(2)on top of the scale base(3)

Install the stainless steel pan(1)on top of the plastic pan(2)
3.3 Leveling

The scale is equipped with a level indicator located left side of keyboard

Use the adjustable leveling feet located on the
bottom of the scale until the bubble appears in
the center of the indicator.
3.4 Power Connection

Connect the adaptor pin in to the indicator adaptor jack.
Adaptor jack is locating below the right side of the scale.

Adaptor connects into your AC power socket. Plugable equipment must be
installed near an easily accessible socket outlet with a protective ground/
earth contact.
3.5 Rechargeable battery operation
Note: Please charge the battery before using the scale for the first time .

The symbol on the weight display indicates that the battery is getting
low. It means that it’s time to charge the battery with the AC power. If
scale goes on being used without proper charging, <BAT-LO> words will
be showed on the display.