Vision metering Sentry 950, Руководство пользователя

Страница: 3 / 10

visionmetering.com
Page 3 Copyright 2015 © Vision Metering, LLC
Sentry 950
Introduction
The Sentry 950 handheld reader is designed to read ERT® radio modules and display
information using a graphical interface through the touch LCD screen. The unit also has a
feature to check the signal strength. Device has an internal memory to take and save
records for a later upload to a windows PC. Radio receiver features high sensitivity
option, as well as a wakeup tone transmitter.
1. Operating Instructions
1.1 Powering Up
To power up the Sentry 950; press and hold key ‘1’ on the keypad for four seconds. The
LCD display will illuminate and display the battery life shown at the top left corner of the
screen.
1.2 Powering Down
Device is powered down automatically if idled for two minutes. To power down the
handheld manually, press and hold '1' on the keypad from main screen for at least four
seconds or an audible beep.
1.3 Main Screen
The main screen is shown below in Figure 1. It leads to the 4 sub-screens: ( Reading ,
Signal Strength, Options, and Browse Memory ). The upper left corner displays the
battery status. If the device is plugged in, it will show either "charging" or "charged." If
the unit is not powered, the battery percent charge will be displayed.
Figure 1
Battery
Status