Dear Customers!
The lighting flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
INFORMATION
CAUTION – To prevent electric shock and risk of the fire hazards
This installation should be made by a qualified service person and should conform to
all local codes.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance(servicing)
instructions in the literature accompanying the appliance.
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much for
your confidence and kindly ask you to read the following instructions carefully before
installation and operation in order to take full advantage of all quality features
regarding this product.
• Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
• Please keep the manual in good condition for your future reference and service
application.
• Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
• If any liquid or solid matter gets into the housing, immediately disconnect the
camera from power supply and have it checked by your authorized dealer before
reusing.
• Avoid installing the camera at extremely hot or cold places.
• Avoid installing the camera at a place of high humidity.
• Avoid installing the camera at the place exposed to gas or oil.
• If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers. There are no parts
inside that need maintenance by the user. All maintenance should be carried out
by qualified personnel.
• Keep the top glass of the lens always clean in order to obtain the best picture
quality all the time. Be careful not to be stained by fingerprint.
• Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
• Please give a special attention to keep the unit from dangerous drop or external
shock during the process of transportation or handling.
• Never try to touch the camera in wet hand. It may cause an electric shock.
• Do not expose the camera to radioactivity. It causes a serious damage on the
image sensor.
This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability, fitness
for any particular purpose, or non-infringement of the third party's right.
This publication could include technical inaccuracies or typographical errors. Changes
are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of
the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason,
becomes public or is used for the purpose other than surveillance.
1. Precautions
2. Limitation of liability
3. Disclaimer of warranty
CAUTION
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
4. Package
5-2. Adjust Pan, tilt and Rotation and the View Angle
a. Panning 360 degree
Turn the pan base right or
left to adjust the pan angle.
b. Tilting 90 degree
Loosen the tilt lever on the right or left side of the camera board.
Control the camera tilt angle and fasten the tilt lever again.
c. Rotation 180 degree
Grasp the front side of the camera board and turn it right or left to set the exact
angle of image.
▪
Panning axis can be adjusted 360˚
▪
Tilting axis can be adjusted 0˚ ~ 90˚
▪
Rotating axis can be adjusted
b180˚(clockwise)
and -180˚ (counter-clockwise)
Do not rotate more 180˚ as this
might cause the internal cables to
twist and disconnect or break.
-How to adjust the View Angle
-Pan, Tilt, Rotate (3-Axis mechanism) makes easy to monitor the desired view
5. Installation
Plastic Key
Insert and twist the plastic key to the rectangular groove on the bottom of the
dome cover. The camera is designed for Indoor use only.
*
5-1. How to open the dome
QUICK INSTALLATION GUIDE
Analog HD Compact Indoor Dome Camera
◆
Special features
•
1.3Mega pixel 1.3" SONY progressive scan CMOS Sensor
•
Supports image resolution up to 1280 x 720P (30fps)
•
On chip - ISP + AHD TX
•
Long range transmission with high resolution
- 1280H (1280 x 720) : 500m via 5C-HFBT, 300m via 3C / 2V
•
3.6mm Megapixel Fixed Lens
•
Supports D-WDR, Defog, 3DNR, LOW shutter
•
Privacy Masking up to 4 areas
•
Supports 16 Languages
•
Tool-free 3-Axis
•
12VDC
Pan 360˚
Pan base
Rotation 180˚
Tilt lever
The front side of the camera
Tilt 90˚
(IR version)
Drilling template
x 1
Installation guide
x 1
Camera x 1
Tapping screws x 3
Plastic anchor
x 3
Plastic Key
x 1
Template
QUICK INSTALLATION GUIDE
Analog HD Compact Indoor Dome Camera
◆
Special features
•
1.3Mega pixel 1.3" SONY progressive scan CMOS Sensor
•
Supports image resolution up to 1280 x 720P (30fps)
•
On chip - ISP + AHD TX
•
Long range transmission with high resolution
- 1280H (1280 x 720) : 500m via 5C-HFBT, 300m via 3C / 2V
•
3.6mm Megapixel Fixed Lens
•
Supports D-WDR, Defog, 3DNR, LOW shutter
•
Privacy Masking up to 4 areas
•
Supports 16 Languages
•
Tool-free 3-Axis
•
12VDC
(IR version)
