Page
4
7) Instruction on IR call back function
The sequence of "TX IR1
，
TX IR2
，
TX IR3
，
TX IR4" one-to-one correspond
with "HDMI INPUT1
，
HDMI INPUT2
，
HDMI INPUT3
，
HDMI INPUT4".
When an output chooses certain input, the call-back IR signal of RJ45 on
this output port will choose the corresponding "TX IR" port to send the
signal out.
For example, OUTPUT1 chooses INPUT3
，
then the call-back IR signal of
RJ45 on OUTPUT1 will choose "TX IR3" to send the signal out.
8) SOURCE-SINK AUTOFIT Function
This function applies to the situation when the source's HDMI version
exceeds the sink's HDMI version.
For example: When the TV is HDMI 1.2 version and PS3 source is HDMI
1.3 version, it will output HDMI 1.2 version.
(1). When under default mode, this machine will output 1.2 version HDMI signal.
(2). Under button mode
A
、
When the source is HDMI1.3, (e.g., HDMI output from PS3)
，
OUTPUT1 to 4 are both
support HDMI1.3 displays, meanwhile the RJ45 is not connected to output port and do
not connect the input, press "selection of OUTPUT1 and lock key" simultaneously this
product will output HDMI1.3 signals.
B
、
when the source is HDMI1.3, (e.g., the HDMI output from PS3), OUTPUT1 to 4 are
connected to the displays that can only support HDMI 1.2 MAX, or the RJ45 is connected
to the output port, meanwhile the input port should not be connected ,press "selection of
OUTPUT1 and lock key" simultaneously (no matter HDMI OUTPUT port is connected to
the display support HDMI 1.3 or not), it outputs HDMI 1.2 signals.
NOTE:
IR emitter should be sticked as near as to the DVD IR receive window.
