Vision Engraving & Routing Systems VR48 5 Series, Руководство по установке

Страница: 6 / 54

Vision VR48 6
© 2020 Vision Engraving & Routing Systems
1.3 General Electrical and Facility Requirements
Machine Model Requirements
VR48 Router - T-Slot Table
With Standard 3 HP Router Head
With Optional 5 HP Router Head
One 220 VAC 50 Amp Single Phase (Vision machine)
One 220 VAC 50 Amp Three Phase (Vision machine)
VR48 Router - Vacuum Table
With Standard 3 HP Router Head
With Optional 5 HP Router Head
One 220 VAC 50 Amp Single Phase (Vision machine)
AND One 220 VAC 30 Amp Single Phase (vacuum pump)
One 220 VAC 50 Amp Three Phase (Vision machine)
AND One 220 VAC 30 Amp Single Phase (vacuum pump)
Optional Equipment
Engraving Chip Removal System
Router Extraction System
Required in addition to the machine power above:
One 110 VAC 15 Amp
OR One 220 VAC 10 Amp
One 220 VAC 20 Amp Single Phase
Optional Equipment Requiring
Compressed Air Supply
UNIST Misting System
NSK 50,000 RPM Spindle
Required in addition to the machine power above:
Clean Dry Compressed Air Supply 60 - 90 PSI
One 110 VAC 15 Amp
OR One 220 VAC 10 Amp Single
Phase AND Clean Dry Compressed Air Supply 1 SCFM
@ 40 PSI
NOTE: In addition to the above requirements, a standard outlet is required for the computer.