19
OPERATION
Scale
`
Use the
and
buttons to set the size of the calibration piece that
can be viewed on the monitor that will be used for calibration.
Right calibration line
`
Use the
and
buttons to set the position of the right calibration line
as displayed on the screen.
Left calibration line
`
Use the
and
buttons to set the position of the left calibration line
as displayed on the screen.
Calibration
`
Press
to activate calibrated measurements.
`
CAL will be displayed in top left corner of the Status bar
`
Features that affect the calibration will be disabled while the calibration is
active. Press
again to turn this feature off to reactivate disabled features.
Calibration
Before setting a calibration, ensure the unit is in Manual Focus
mode at Inf. When a calibration is set, the unit is automatically set
to Manual Focus mode and this can cause the object to move out of
focus if working in Automatic Focus mode.
`
With the calibrate options (
) displayed, use the
and
buttons
to highlight the option required and then press
to enable the value
to be altered if necessary.
Exit
Contents
Preface
Assembly
Operation
Maintenance
Specification
System Diagram
Start page
Содержание EVO Cam II
Страница 1: ......