Vision & Control 4-20-327 страница 49 Скачать руководство пользователя | Manualshive

Страница: 49 / 62

background image

pictor M1817

Maintenance and Service

49

999.994.528.10-en-1.4

© Vision & Control GmbH 2014

9 MAINTENANCE AND SERVICE

9.1 Maintenance

The device is maintenance-free. Depending on the operating environment, it

may have to be cleaned.

Cleaning the outer face

The housing can be cleaned according to the conditions applicable to the given

protection class.
Clean the outside with a damp cloth and a gentle cleanser.
Cleansers must not be applied directly to the housing, and the housing must

not be bathed.
Do not use any corrosive cleansers, such as lyes, MEK cleanser (methyl ethyl

ketone), benzine or similar substances!
The device must not be opened. The port sockets must be clean and dry

before the device is connected and brought into operation.

Cleaning the protective glass / filter

Do not scratch and keep dust and grease off the protective glass! Do not touch

the glass!
If it is heavily soiled, clean the protective glass with a cotton bud soaked in

ethyl, methyl or isopropyl alcohol. The alcohol must not be applied directly to

the protective glass.
Clean and care for the lenses as described in the guide for the relevant lens.

Cleaning by the manufacturer

The device can be sent to the manufacturer for cleaning (for a fee). Please

contact our Technical Support.

«
...
47
48
49
50
51
...
»

Содержание 4-20-327































































Отзывы:

Нет отзывов

Похожие инструкции для 4-20-327

Бренд: Ebode Страницы: 76

Бренд: Eborn Страницы: 20

ARTCAM-990SWIR-TEC-CL

Бренд: ARTRAY Страницы: 17

Бренд: HuddleCamHD Страницы: 17

Бренд: Lencarta Страницы: 8

Бренд: HIKVISION Страницы: 10

Бренд: EchoMaster Pro Страницы: 4

Бренд: Avermedia Страницы: 24

Бренд: Olin Страницы: 34

Бренд: OPTO-EDU Страницы: 8

Бренд: Tasco Страницы: 24

NVC 1000 Series

Бренд: Inscape Data Страницы: 14

Бренд: Recordex Страницы: 2

Бренд: FujiFilm Страницы: 60

Бренд: Elinz Страницы: 7

Бренд: HIKVISION Страницы: 184

Бренд: Yashica Страницы: 55

Бренд: Provision ISR Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды