BewellConnect - BW-TSX/BW-TS1 - User Manual - 11-2017v2
BewellConnect - BW-TSX/BW-TS1 - User Manual - 11-2017v2
12
13
2) The device can only be used safely with the original recharger, DO NOT reassemble or change
the specification of the recharger. So please always use the recharger which supply by
manufacturer or distributor.
Plugging in the device figure B on page 2
1. Disconnect the cable used to connect the two connector units from the unit with the battery
light and micro-USB socket.
2. Insert the micro-USB cable into the micro-USB socket for the respective connector unit .
3. Insert the USB plug into a computer to charge the device.
4. When the battery light goes into continuous orange (which means that the battery is
being charged) to a continuous green (the battery is full), remove the micro-USB plug from
the micro-USB socket of the connector unit with the battery indicator (see the chapter 4). Use
the USB plug only for the use described above (to charge and connect to the cable connecting
the two connectors units).
5. Reconnect the cable connecting the two connectors units : Insert the unit with the cable into
the micro-USB socket for the unit with the battery light .
4.2 ELECTRODES
BewellConnect® electrodes pads are used with MyTens devices, for muscle stimulation or pain
relief. The electrodes pads help connect the MyTens muscle stimulator to your skin. Electrodes
pads are the points where the pulses are transmitted to your motor nerves, and ultimately your
muscle fibers.
• Ensure that the skin is healthy and shows no: irritated skin, injuries, open wounds, redness,
rashes or pre-cancerous lesions.
• Position the electrodes only on intact and healthy muscles. In case of doubt, contact your
doctor or physiotherapist.
• Clean skin thoroughly prior to each application of the electrodes. Electrodes do not stick well if
any lotion, oil, make-up, dirt, etc. is left on skin. Always moisten skin with a damp cloth prior to
applying the electrodes. This will improve the electrode adhesion and life.
• Remove the electrodes from the bag, ensure they are not damaged or worn. If the expiration
date has past / is exceeded, do not use these electrodes (the life time for Mytens pads is two
years).
• A BewellConnect® electrode pad is coated with a strong adhesive, developed to stick to your
skin.
• Used in normal circumstances, a BewellConnect® electrode pad should last 15 to 20 sessions
• Remove the clear plastic film from the back of the electrode pad.
• Place electrodes on clean, dry and healthy skin near, and do not let them touch. Make sure
there is a linear path between the two electrodes.
• Avoid any contact between both of the electrodes, do not place them on top of eachother.
• Follow instruction ad steps within the app.
• Attach the electrodes to the device using the snap buttons provided for this purpose. (see
picture 5 page 2)
• Positioning the electrodes on the body is explained within the app for each program.
• It is possible that you may need additional assistance for placing the electrodes on certain
areas (back area).
• Make sure that the device is switched off when moving the electrodes to avoid risk of injury
to yourself or others.
Electrodes positions are displayed in the app. (Check the MyTens app user manual online)
WHEN SHOULD YOU REPLACE YOUR ELECTRODES PADS ?
1 When they no longer stick to your skin.
2 When the same intensity setting of the program creates less intense or uncomfortable muscle
contractions.
3 When the adhesive is filled with lint, dust or hair.
5. USE
5.1 PROGRAMS PRESENTATION
INDEX
PROGRAM
ID
SUGGESTED
TREATMENT
SITE
TYPE OF
ELEC-
TRICAL
STIMULA-
TION
DESCRIPTIONS
CATEGORY
OF PRO-
GRAMS (IN
THE APP)
1
SHOULDER
TENS
ENDOR-
PHINIC
This
Pain relief strong massage
program, use for temporary
relief of
pain
associated with sore and aching
muscles in shoulder, waist, back, neck,
arms, or legs to strain from exercise
or normal activities. Stimulate your
circulatory system to help eliminate
waste and toxins from your body. This
should also induce an
endorphin
release
, which react in the brain to
reduce our perception of pain. This
program is also good for
back pain
.
Intensity should induce visible
muscular contractions, but it must
remain bearable so as not to cause
any pain.
PAIN
RELAXA-
TION
