DRS Connector
close-up
SC30 connection to DRS Dome and NavNet 3D
(15 or 30 meter antenna cable)
Ethernet and power
Inside DRS2D and DRS4D
Use the included 3 hole
gasket for this
installation application.
12
3
4
5
6
N2K: SC30 Backbone
cable
15 meter = 000-166-891
30 meter = 000-166-892
Terminator Resistor
120
Ω
000-167-746
(supplied)
(Terminator resistor
included in both of these
cable lengths)
Connect the wires to the green N2K
terminal inside the DRS Dome.
Match the wire colors to the colors shown
in the DRS Connector close-up.
The Purple, Yellow and Green wires in this
cable are not used for this connection.
They need to be cut back, isolated and
taped so they don’t short to any other
wires and cause equipment damage.
