VISIO Patriot Titan II 22 HD, Руководство пользователя

Страница: 8 / 28

Very first time power on after installation 8
5
Very first time power on after installation
The following chapter usually can be skipped, as this has usually
already been done when you received your
Patriot Titan II 22 HD
. It
should not be necessary that you do this again.
Connect
Patriot Titan II 22 HD
power supply to mains.
Press Power button on left of control unit for about one second or
until lights turn on, monitor should be turned on automatically. (Check for
red light on bottom right of TFT display.
Display power button is directly below light. You can move your finger
from the right bottom edge of Display frame slowly to the left, until you
feel the raised power button. After pressing this button, the red light will
be lit. From now,
Patriot Titan II 22 HD
will switch on the Monitor
automatically.
The above steps only have to be performed once directly after assembly.
In your daily use from then on, you only have to press the Power button
on the
Patriot Titan II 22 HD
control panel.