4.
CALIBRATION ON
SMARTPHONE & TABLET
To obtain accurate measurement data for each magnification, please calibrate before any
measurements. Use the enclosed calibration ruler. Bring the image into focus by turning the
“Focus & Magnification adjustment wheel”;
CALIBRATION ON
iOS
Click the calibration icon
to pop-up the screen;
Click “Calibration”
Calibration
:
A. Click to select a first point and refine the selection by clicking the arrows.
B. In the same way select a second point at a known distance;
C. Press any point on the screen.
D. Enter the actual value of lenght and press “OK”: a line of known length will appear.
CALIBRATION ON
ANDROID
A.
Click on the triangle button on the top-left of the screen and enter the scale value in the
“Magnification” box.
B.
Use the enclosed calibration ruler as observed object. Click on
C.
Click
calibrate
to start calibration.
D.
Click to select a first point and refine the selection by clicking the arrows.
E.
In the same way select a second point at a known distance.
F.
Press any point on the screen, enter the actual value of lenght and press “OK”: a line of known
length will appear.
Now the calibration is completed. Click on the screen again, you can make measurements on
the live video using the same focus. If the new photo object is not in focus, please only adjust the
distance between the microscope and the object until the photo is clear.
For more information about Calibration go to Visio-tek official website
www.visio-tek.net
and search the related video tutorial.
5. CONFIGURATION & INSTRUCTIONS FOR
VISIO-EYE
VISIO-
EYE
Battery
Indicator
Wi-Fi
Indicator
Power
Indicator
Snapshot ( )
Power Button ( )
FOR EYEPIECE
MICROSCOPES
C- Mount thread microscope:
connect by screwing the VISIO-EYE to your Eyepiece Microscope.
Microscopes with 23 mm diameter eyepiece:
screw VISIO-EYE to VISIO-SCOPE lens and insert in the Eyepiece Microscope.
Microscopes with 30 mm diameter eyepiece:
screw VISIO-EYE to VISIO-SCOPE lens; enter the 30.0 adapter and insert in the Eyepiece
Microscope.
Microscopes with 30.5 mm diameter eyepiece:
screw VISIO-EYE to VISIO-SCOPE lens; enter the 30.5 adapter and insert in the Eyepiece
Microscope.
FOR OPTICAL
ENDOSCOPES
Screw VISIO-EYE to VISIO C-coupler and holding the C-couplers’ flaps open, insert the
endoscope; rotate C-coupler’s zoom ring to focus. Depending on the microscope or endoscope’s
magnifying lenses, it may be necessary to tighten the VISIO-EYE-RING on your VISIO-EYE.
5
6
