TEAK30
TERMINAL UNIT FOR HANDHELD USE
User's Manual
3
Contents
Contents
Contents
Contents
Contents
1. Introduction and Taking into Use
1. Introduction and Taking into Use
1. Introduction and Taking into Use
1. Introduction and Taking into Use
1. Introduction and Taking into Use
44444
General
General
General
General
General
44444
Installation
Installation
Installation
Installation
Installation
44444
Connecting the Cables
Connecting the Cables
Connecting the Cables
Connecting the Cables
Connecting the Cables
44444
2. Operating
2. Operating
2. Operating
2. Operating
2. Operating
99999
General
General
General
General
General
99999
Setting Meter Features
Setting Meter Features
Setting Meter Features
Setting Meter Features
Setting Meter Features
99999
Setting Up the Display Unit
Setting Up the Display Unit
Setting Up the Display Unit
Setting Up the Display Unit
Setting Up the Display Unit
99999
Modes of Operation
Modes of Operation
Modes of Operation
Modes of Operation
Modes of Operation
10
10
10
10
10
Analog Interface Operation
Analog Interface Operation
Analog Interface Operation
Analog Interface Operation
Analog Interface Operation
10
10
10
10
10
11
11
11
11
11
11
11
11
11
11
The moisture reading is now given in percent according to the original calibration pass-
The moisture reading is now given in percent according to the original calibration pass-
The moisture reading is now given in percent according to the original calibration pass-
The moisture reading is now given in percent according to the original calibration pass-
The moisture reading is now given in percent according to the original calibration pass-
ing to TEAK30 via the voltage message. The two lower lines indicate present time and
ing to TEAK30 via the voltage message. The two lower lines indicate present time and
ing to TEAK30 via the voltage message. The two lower lines indicate present time and
ing to TEAK30 via the voltage message. The two lower lines indicate present time and
ing to TEAK30 via the voltage message. The two lower lines indicate present time and
date. TEAK30 has an internal clock which can be configured correctly. The time setting
date. TEAK30 has an internal clock which can be configured correctly. The time setting
date. TEAK30 has an internal clock which can be configured correctly. The time setting
date. TEAK30 has an internal clock which can be configured correctly. The time setting
date. TEAK30 has an internal clock which can be configured correctly. The time setting
will be cleared if the PS is turned off.
will be cleared if the PS is turned off.
will be cleared if the PS is turned off.
will be cleared if the PS is turned off.
will be cleared if the PS is turned off.
11
11
11
11
11
11
11
11
11
11
The moisture reading has an optional low-pass filter. It can be turned on/off in the
The moisture reading has an optional low-pass filter. It can be turned on/off in the
The moisture reading has an optional low-pass filter. It can be turned on/off in the
The moisture reading has an optional low-pass filter. It can be turned on/off in the
The moisture reading has an optional low-pass filter. It can be turned on/off in the
configuration menus. Normally, measurement continues forever until interrupted by the
configuration menus. Normally, measurement continues forever until interrupted by the
configuration menus. Normally, measurement continues forever until interrupted by the
configuration menus. Normally, measurement continues forever until interrupted by the
configuration menus. Normally, measurement continues forever until interrupted by the
user. No data values are saved, just the reading is displayed.
user. No data values are saved, just the reading is displayed.
user. No data values are saved, just the reading is displayed.
user. No data values are saved, just the reading is displayed.
user. No data values are saved, just the reading is displayed.
11
11
11
11
11
11
11
11
11
11
Making Measurements
Making Measurements
Making Measurements
Making Measurements
Making Measurements
11
11
11
11
11
12
12
12
12
12
Configuring the Terminal
Configuring the Terminal
Configuring the Terminal
Configuring the Terminal
Configuring the Terminal
12
12
12
12
12
Appendix 1. Schematics of the TEAK30 connections.
Appendix 1. Schematics of the TEAK30 connections.
Appendix 1. Schematics of the TEAK30 connections.
Appendix 1. Schematics of the TEAK30 connections.
Appendix 1. Schematics of the TEAK30 connections.
14
14
14
14
14
Index 17
Index 17
Index 17
Index 17
Index 17