SMARTWAV 2 + MIDI ADAPTER UPGRAGE DRUM MODULE SOUNDS
Quick Guide
Vizic Technologies ©2020 | 18
5.3- MicroSD Card “MIDIConfig.txt” File Configuration
Creation of the “MIDIConfig.txt” file, for this tutorial only the next
parameters must be contained in the txt file:
-Note OFF Disable: If the file contains the word
NOTEOFFDISABLE
,
SmartWAV2 will disable/ignore all Note OFF commands during system
run, this functionality is great for percussion sounds, where there is no
need to receive or must ignore Note OFF commands that can cut /
stop the sound.
-Layer Velocity: If the file contains the word
LAYERVEL
, SmartWAV2 will
enable
the velocity layering functionality of the system, this means
that during system execution, received notes will trigger tracks based
not only on the note number, but also on the
velocity
parameter.
Apart from many MIDI trigger systems that doesn’t support it,
SmartWAV 2 processor supports configurations so a real Hi-Hat pedal
action (stopping the sound of an open hi-hat ringing sound when the
hi-hat pedal is stomped/closed), this can be simulated by providing
two note numbers, the
HHCLOSENOTE
and the
HHOPENNOTE
, the next
paragraphs will describe those keywords:
-Hi-Hat Close Note: If the file contains the word
HHCLOSENOTE
:
followed by a number between
0-127
, SmartWAV2 will take this note
and save it during system execution.
-Hi-Hat Open Note: If the file contains the word
HHOPENNOTE:
followed by a number between
0-127
, SmartWAV2 will take this note
and if during system execution, a “Note On” command with note
number same as the saved
HHCLOSENOTE
is received, the system will
automatically stop playing the track number
HHOPENNOTE
(open hi-
hat note sound), this will simulate a hi-hat close pedal action. This
functionality is intended for drum modules / percussion applications.
