Viscount Viva, Руководство пользователя

Страница: 8 / 24

VIVA Series - Digital Piano
28
The SPLIT key activates the split of the sounds on the keyboards
(layer). When the SPLIT key is active, the
first layer is active on the left side of the
split point, the second on the right. When
the SPLIT key is not active, the two layers
cover the whole range of the keyboard, are both active and working.
To change the split point: press the SPLIT key until the display
flashes and indicates the split note on the display. Pressing the
desired key as a new split point the value is selected and indicated
on the display. Pressing SPLIT again the new point is stored and the
number of Performance appears again.
To eliminate the split point press the SPLIT key again.
The TRANSPOSE key is used to transpose the keyboard tune.
Pressing it shortly the function is activated, and pressing the key
again the function is cancelled. Pressing TRANSPOSE for at least two
seconds you can change the transpose interval, acting on the
encoder. The values go from –12 to +12 (they correspond to 1
octave up and one down), and they are visualized on the display.
The STORE key enables the STORE Mode: this is the memory save
mode for the editing on a Performance (see the specific chapter).
Under the encoder we find the PERFORMANCE and EDIT keys.
When we switch on the instrument, or we play normally, the
keyboard is in PERFORMANCE mode; it is possible
to access the EDIT mode when we press the EDIT
key, to modify or set some parameters. Pressing
PERFORMANCE we go back to the Performance
mode again.
With the EDIT mode we can set all parameters included in a
Performance.
On the right side of the control panel, we find the timbre/parameter
selection matrix. The controls act on the layer selected with the
LAYER SELECTION keys.