manualshive.com logo in svg

Viscount UNICO 300, Справочное руководство


Поделиться
Скачать
background image

22

Viscount 

Physis Organs

Reference Manual

WARNING!

This group of rear connections is not visible from the outside and the organ’s wooden rear panel has
to be removed to access it. Contact qualified staff for this procedure.

28. Reverse Pistons.

Each of  these pistons, when active, deactivates several functions and stops, without acting on the normal
pistons dedicated to these functions and stops. Thanks to the reverse pistons it is possible to switch on/
off  several stops and functions quickly and at the same time. When the reverse pistons are deactivated,
the functions will be re-activated.
-

[MIDI REVERS.]: turns off  all the MIDI controls.
However, even when MIDI REVERS. is active, it is still possible to program the MIDI controls.

-

[32’ FLUTE REVERS.]: deactivates all 32’ flutes.

-

[32’ REED REVERS.]: deactivates all 32’ reeds.

29. Power switch for the [EXT +12V DC] connector.

This connector is situated on the rear panel.

30. Tremolo controls.

Here are the tremolo of  each section (1st Tremolo, see par. 8.2) and, if  present, the one dedicated to the
register Vox Humana (2nd Tremolo, see par. 8.2).

The [GREAT / PEDAL] pedal works also as Crescendo pedal. For further information about this function
read par. 9.6.
One of  the pedals is actually equipped with a leverage system and can be used to control the sustain effect
for Orchestral voices.

26. [CRESCENDO] pedal.

With this pedal you can select the Crescendo level. These levels activate a fixed set of  stops, linked with
an equal number of  loudness, from 

pianissimo

 to 

fortissimo

.

The current level is shown on the additional [CRESCENDO] display (see point 13). The Crescendo
controls all the registers, and modifies the stops configuration.
Each level of  the crescendo can be programmed. To save the Crescendo configuration, see point 20.

27. Rear connections.

On the rear of   the organ, there  are various sockets to connect it to an external speaker systems, together
with line and microphone input.
-

[EXT. +12V DC] connectors: +12 Volt can be obtained from these connectors to switch-on any
VISCOUNT speaker connected to the PROG. OUT. outputs.

-

OUT [GEN. SUB] (General Sub-Woofer): dedicated output for the connection with  low-frequency
speakers (sub-woofers).

-

PROG. OUT (Programmable Outputs): the instrument’s general line outputs, allowing simulation of
the wind-chests of   pipe organs. The signals are distributed over the outputs on the basis of  the
EXTERNAL OUTPUT ROUTER settings (see par. 9.10). These settings allow you to select the type
of   wind-chest, its size and the position in space of   the speakers. Each output also has dedicated level
and equalization controls (see par. 9.11 and 9.8).

-

INPUT  [L(+R)]  /  [R]:  line  inputs  which  allow  other  instruments  to  be  played  using  the
organ’s internal amplification. If   the source is monophonic use the [L+(R)] connector only.

-

INPUT [MIC]: microphone input allowing amplification of  the signal from a microphone.

-

[GAIN]: trimmer for regulating the gain of   the input signal received at the [MIC] connector.

Содержание UNICO 300

















































































































Отзывы:

Нет отзывов

Похожие инструкции для UNICO 300

Campbell 107 Product Manual preview
107
Бренд: Campbell Страницы: 25
Larson Davis 820 Quick User Manual preview
820
Бренд: Larson Davis Страницы: 2
G-Tek 27 Series Operating Manual preview
27 Series
Бренд: G-Tek Страницы: 27
C-LOGIC 8900 Instruction Manual preview
8900
Бренд: C-LOGIC Страницы: 4
C-lock GreenFeed Instruction Manual preview
GreenFeed
Бренд: C-lock Страницы: 32
C-LOGIC 8730 Instruction Manual preview
8730
Бренд: C-LOGIC Страницы: 12
IEI Technology IW04-MB14-N User Manual preview
IW04-MB14-N
Бренд: IEI Technology Страницы: 85
LaserLiner LaserRange-Master T4 Pro Manual preview
LaserRange-Master T4 Pro
Бренд: LaserLiner Страницы: 68
LaMotte DC1500 CHLORINE User Manual preview
DC1500 CHLORINE
Бренд: LaMotte Страницы: 60
Vaisala MGP261 User Manual preview
MGP261
Бренд: Vaisala Страницы: 90
Vaisala HMP110 series Manual preview
HMP110 series
Бренд: Vaisala Страницы: 4
bentrup TM 100 Operating Instructions Manual preview
TM 100
Бренд: bentrup Страницы: 9
Mic 98871 Operation Manual preview
98871
Бренд: Mic Страницы: 2
ORANGE Crush PiX 20L Owner'S Manual preview
Crush PiX 20L
Бренд: ORANGE Страницы: 13
Interacoustics AT235 Instructions For Use Manual preview
AT235
Бренд: Interacoustics Страницы: 60
Monnit Alta Site Survey Tool User Manual preview
Alta Site Survey Tool
Бренд: Monnit Страницы: 15
H.E. Anderson Ratio:Guard Advanced Manual preview
Ratio:Guard Advanced
Бренд: H.E. Anderson Страницы: 9
Endress+Hauser 11362Z Safety Instructions preview
11362Z
Бренд: Endress+Hauser Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды