Viscount Prestige 80, Быстрое руководство

Страница: 36 / 132

34
Viscount - Quick Guide Prestige 80
2. Dedicated memories: the Prestige 80 memories also include six dedicated memories for Man.III
(2A), Man.II (2B), Man.I (2C) and the pedal board (2D). In the dedicated memories it is only
possible to save the set up of the section coupled to the selected memory.
The memories also include an [HR] button, also known as 0, which recalls the set up that was
present before a memory was activated. The contents of [HR] are not affected by calling up a
memory when another one has previously been activated.
In each memory, whether general or dedicated memory, the following can be saved:
- the voices (including Orchestra)
- the couplers
- the Tremulants (also with different speed and depth by activating this function on menu
Set-Up, see par. 4.3)
- the MIDI To controls (par.3), MIDI Solo (point 8 of this paragraph) and Program Change
set using the SEND PROGRAM CHANGE function (“Advanced Manual”)
Only in the general memories is it also possible to save:
- the Organ Solo
- the Enclosed and Automatic Pedal (by activating the relevant function, see par. 4.3)
For the memory saving procedure, see point 3.
3. [S] button: “Set” button which enables memory saving. To save a memory, simply press the
[S] button and, keeping it pressed down, then press the button of the memory you wish to save,
whether it is dedicated or general.
4. [P] buttons: these buttons activate the couplings of the manuals with the pedal board, as follows:
o
[P] (4A): coupling the third manual with the pedal board (III/P).
o
[P] (4B): coupling the second manual with the pedal board (II/P).
o
[P] (4C): coupling the first manual with the pedal board (I/P).
5. Second manual couplers: these buttons activate the couplings with Man.II, as follows:
o
[III]: coupling the third manual with the second (III/II).
o
[I]: coupling the first manual with the second (I/II).
6. [III] button: this button enables the coupling of the third manual with the first (III/I).
NOTE
The couplers do not work on the Orchestra voices.
7. [O.SOLO] button: this button controls the status of the Organ Solo function. By activating
this function plus the coupling III/II the voices of the third manual can be played on the
second manual in monophony with priority given to the highest note. On the third manual the
voices continue to sound in polyphony.