EN - 47
Legend ‘70s
– User Manual
Modifying a Program
Efx Rate:
effect modulation speed.
Efx Depth:
effect modulation depth.
High Bars:
signal level of the treble drawbars.
Percussion:
percussion level (for electromechanical organs).
Rotary:
enable / disable the Rotary effect, simulating the classic rotating speaker used with
electromechanical organs.
Vibrato Depth:
modulation depth of the vibrato effect.
EXTERNAL section
The
EXTERNAL
menu contains all the configuration parameters of the
EXTERNAL module (described at page
).
The EXTERNAL module is comprised of two independent parts, that
can be recalled through the buttons [1] and [2]
on the main panel
.
The EXTERNAL section is always present in the Program, even when
the EXTERNAL module is not installed on the instrument. If there is no
EXTERNAL module on your instrument, the parts [1] and [2] can be
recalled by pressing the buttons [SET 1] or [SET 2] (respectively) on the main panel. To access this menu,
enter the
EDIT PROGRAM
) place the cursor on the
EXTERNAL
field and press the data entry
dial, or hold down the MIDI message or function selection knob for a short while (point 4, page
15).
Parameter name
Description
Switch
[ON/OFF]
Same function of the parameters described at page
Volume
[VOLUME]
Volume of the transmitted MIDI message value (Control Change 7).
Values:
between 0 and 127
Output Port
[VALUE]
MIDI data transmission port. The value can be also modified through the [VALUE] control of the
module, when the MIDI message/function selector is set on Port.
Values:
MIDI:
MIDI [OUT] connector.
USB:
USB [TO HOST] connector.
Channel
[VALUE]
MIDI channel transmitting MIDI data. The value can be also modified through the [VALUE] control
of the module, when the MIDI message/function selector is set on Channel.
Values:
between 1 and 16
Note Shift
Pitch Bend
Mod.Wheel
Sustain Pedal
Foot Switch1
Foot Switch2
Foot Control1
Foot Control2
Same function of the parameters described at page
Program Change
[VALUE]
Program Change message transmission. The value can be also modified through the [VALUE]
control of the module, when the MIDI message/function selector is set on Program.
Values:
between 0 and 127
Bank Select MSB
[VALUE]
Bank Select MSB message transmission. The value can be also modified through the [VALUE]
control of the module, when the MIDI message/function selector is set on Bank MSB.
Values:
between 0 and 127
Bank Select LSB
[VALUE]
Bank Select LSB message transmission. The value can be also modified through the [VALUE]
control of the module, when the MIDI message/function selector is set on Bank LSB.
Values:
between 0 and 127
Ctrl 1 CC
Ctrl 2 CC
Ctrl 3 CC
[VALUE]
Control Change assigned to the [CTRL 1], [CTRL 2] and [CTRL 3] knobs. The value can be also
modified through the [VALUE] control of the module, when the MIDI message/function selector is
set on Ctrl 1 CC, Ctrl 2 CC and Ctrl 3 CC.
Values:
between 0 and 127
Ctrl 1 Value
[CTRL 1]
Ctrl 2 Value
[CTRL 2]
Ctrl 3 Value
[CTRL 3]
Control Change value assigned to the [CTRL 1], [CTRL 2] and [CTRL 3] knobs, sent when the
Program is recalled. The value can also be modified through the above mentioned knobs
Values:
between 0 and 127
NB
The following table lists all the available parameters of the EXTERNAL module. The knob or button that allows direct
control of the parameter through the pane, is written under the parameter name.
Содержание Legend '70s Artist
