Owner's Manual – Viscount Cantorum V
4 ADVANCED FUNCTIONS
4.1 SPLIT AND MANUALS
The default Split point between Manual I and Manual II is C4 (left included).
When the Split is disabled Manual II and Manual I voices play on the entire keyboard range.
When the Split is enabled Manual I and Bass voices play on the left part of the keyboard and
Manual II play on the right part of the keyboard.
The Bass section is monophonic, with lowest-key-priority.
If Split Point is set over 32
nd
key (G4), Bass section won't play above this key.
➢
SET THE SPLIT POINT
To set the split point press and hold down the
[SPLIT]
button; when the LED starts blinking, keep
pressing the
[SPLIT]
button and press the key on the keyboard that you want as the new Split Point.
It is not possible to set a Split point higher than C7 or lower than C3. If the chosen Split Point
exceeds the upper or lower limit it will be moved to C7 or C3 (depending on whether it has
exceeded right or left).
Note: the Split point position is NOT modified by the TRANSPOSER.
➢
BALANCE RESET
When the split point is enabled, the volume of the right (Manual II) and the left (Bass and Manual I)
part of the keyboard can be balanced using the
[BALANCE ►]
e
[BALANCE ◄]
keys. To reset
BALANCE quickly push in sequence
[BALANCE ◄]
,
[BALANCE ►]
and
[BALANCE ◄]
.
4.2 PITCH FINE TUNING
To fine-tune the pitch push
[SET]
, then
[BALANCE ►]
or
[REVERB ◄]
to decrease or increase
it. To set it back to 440Hz, push
[SET]
,
then
[BALANCE ►]
and
[REVERB ◄]
at the same time.
4.3 VOICES
There are nine orchestral voices, that can be associated to the three orchestra buttons (one for
manual I, two for manual II). The orchestral voices are: male choir, female choir, strings1, strings2,
celesta, harp, harpsichord, chimes and piano.
EN - 9