ViscoTec preeflow plug'n'dose AM, Инструкция по эксплуатации и техническому обслуживанию

Страница: 5 / 12

plug’n’dose AM
Operating and maintenance instructions
Copyright © Version 1.3 5 / 11
4
Safety
4.1 Informal safety measures
» The operating and maintenance instructions should always be kept at the location
where the control system is in use.
» General and local regulations on health, safety and environmental protection must also
be provided and complied with.
4.2 Use of symbols
The following symbols are used in these instructions:
4.3 Correct use, warranty
The control system is designed for controlling our dispensers in non explosion-protected
environments.
Any
» modifications and additions,
» use of non-genuine spare parts,
» repairs by persons or organisations not authorised by the manufacturer
that are made without the express, written consent of the manufacturer will render the
warranty void and result in the loss of any right to make a claim under the warranty.
No liability can be accepted for damage caused by failure to observe the operating and
maintenance instructions.
4.4 Qualifications of the operators and maintenance personnel
The operating organisation is responsible for ensuring that the operators and
maintenance personnel are suitably qualified. The operating and maintenance
instructions must have been read and understood. The relevant technical rules and safety
regulations must be complied with.
Text in
italics
Names of keys/buttons, connectors, chapters, screen displays, proper
names and input boxes
1 Legend number in an illustration
Warning note. Failure to observe these notes may result in injury and
damage to the control system.
Reference to technical information about operation and / or about
preventing damage.