Visatron 10980, Руководство по эксплуатации

Страница: 38 / 73

Procedure for parameter adjustment
- The "UP" and "DOWN" light sensitive buttons have to be touched simultaneously for
more than 3 seconds. The following display appears:
- Display "CODE" : P000 (=parameter code )
- Display "VALUE" : blank
- LED - Chain bottom LED on, all others off
- LED "READY": no change
- LED "TEST": no change
- LED "ALARM": no change
The following choice can be made now:
The parameters can be displayed or the parameters can be displayed and changed.
The display will set itself back into its basic state if no input is made for more than 60
seconds.
Display of parameters only
By touching the light sensitive button "UP" the parameter code will be increased.
By touching the light sensitive button "DOWN" the parameter code will be decreased.
Meaning of parameter codes, refer to table 3.
In the display "VALUE" appears the value of ther corresponding parameter.
Leaving the parameter adjustment function, is achieved:
- By touching the "UP" and "DOWN" light sensitive buttons simultaneously for more
than 3 seconds,
- Or automatically if no inputs are made with the light sensitive buttons for more than
60 seconds.
see Table 3
3. 11
Operating Instruction Visatron VN 93
06. 04