manualshive.com logo in svg

Visara VI-5990A, Руководство по установке и настройке

Поделиться
Скачать
Visara VI-5990A Скачать руководство пользователя страница 46

 

 

Chapter 4. Configure Tape Drives 

4-4  

707166-001 

Return:

  Pressing this button will take you back to the Configure Tape Drives menu. If 

you have not saved the changes that you made while on this panel, a message will be 
displayed allowing you to save the changes before you exit the panel.   
 
 
 

Configuring Path’s 

 
Select the [Path’s] button on the Configure Tape Drives menu. Doing so should result in 
the following panel: 
 

 

 
 

Field Definitions 

 

Path Name:

  Enter the name that you wish to use for the Path that you are defining. In 

some cases you may want to use the CHPID name or a combination of Host and CHPID 
to keep the name relevant to what you are doing. Other possible names may include the 
switch and port that the VI-5990 is attached to.  
 

Host Director Port:

  This entry identifies the FICON switch and port to which the host 

is attached, related to the PATH/CHPID being defined in the previous field. If the FICON 
channel is directly attached to the host, the value for this field should be ‘FFFF’. 
 

Ficon Channel:

  This control is a dropdown control that includes all of the FICON 

interfaces installed on this platform. Select the FICON Channel interface that the 
PATH/CHPID will be connected to. 
 

Содержание VI-5990A

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды